3.1 Wi-Fi Monitor(WTH8266)
3.2 Wi-Fi Monitor(WTH3080)
3.3 GPRS Monitor(GTH202)
3.4 GPRS Monitor(GBTH202)
3.5 LTE Monitor
3.6 Firmware Upgrade
4.1 Add your Device
4.2 View data on Web Portal
4.3 View Data on WeChat
4.4 Alert Notification
7.1 WTH8266
7.2 WTH3080
7.3 GTH202

1. Introduction

In order to cater for different application scenarios, the Wi-Fi monitor provides open interface for integration to the server of the third party.

How it Works

1

2. Set Socket for WTH8266

WTH8266 can work as a tcp client. You can set its Socket parameter to set up the communication with remote tcp server.

Communication Process Please refer to the below demo for communication process.

WTH-8266 socket

  1. We use Netcat to set up a tcp server on our server of the domain name test.iammeter.com and then type the command (nc -l 12345) to listen to the port 12345.
  2. Login the configuration webpage of WTH8266 and set the Socket (same domain name or ip and port No.) to set up the communication with remote tcp server.
  3. Tcp server receives the data packet while starting the communication with WTH8266
  4. Each time the tcp server sends a read command (nc command: ctrl+D), it will receive the data packet.

Data Packet Description

The example of the data package is:

"data": [13.1875], "mac": "b4e62d313338"

data:The first data is the temperature value, and the second one is the humidity value. If only the temperature is measured, just one data is transmitted.

mac:The mac address of the WiFi module which can be used as SN.

3. Set Socket for WTH3080

WTH3080 can work as a tcp client too. You can set its Socket parameter to set up the communication with remote tcp server.

Communication Process Please refer to the below demo for communication process.

WTH-3080 socket

  1. We use Netcat to set up a tcp server on our server of the domain name test.iammeter.com and then type the command (nc -l 12345) to listen to the port 12345.
  2. Login the configuration webpage of WTH3080 and set the Socket (same domain name or ip and port No.) to set up the communication with remote tcp server.
  3. Tcp server receives the data packet while starting the communication with WTH3080 and then the WTH3080 uploads the packet once a minute automatically.

Data Packet Description

The example the data package is:

"method":"uploadsn","mac":"B0F8933BBCBF","version":1.29,"server":"HT","SN":"C2FA94D9","Data":[19.4]

mac: Mac address of the WiFi module version: Firmware version of WTH3080 SN: SN of the device Data:The first data is the temperature value, and the second one is the humidity value. If only the temperature is measured, just one data is transmitted.